Changsha Yihong Pharmaceutical Equipment Machinery Factory

Welcome to the website of Changsha Yihong Pharmaceutical Machinery Factory. Our factory mainly produces pharmaceutical equipment, food equipment, packaging equipment, etc. The main products are, Chinese medicine tablet press, Chinese medicine pill making machine, Chinese medicine slicer, Chinese medicine crusher, mixer, There are dozens of types of equipment such as granulators, coating machines, capsule machines, filling machines, sealing machines, capping machines, capping machines, etc. The
capping machines
we introduce below are also the focus of sales. One piece of equipment
The oral liquid capping machine is a desktop three-knife cyclone capping machine with a stainless steel appearance, safe and convenient to operate. When working, the capped bottles do not rotate and are distributed evenly
The three cyclone knives rotate For capping and sealing, the knife handle is designed with a spring structure. The distance between the three knives can be finely adjusted. It has strong adaptability and high capping yield. This machine is an ideal choice for military units, hospitals, laboratories, and small pharmaceutical factories.
Main technical parameters of oral liquid capping machine
, usage specifications
ml glass bottle sealing
, production capacity
bottles
/
points< br/>, motor power
,
,
, appearance dimensions


, machine weight
Detailed introduction of oral liquid capping machine
1. Adjustment of the upper arm when rolling bottles of different specifications
This machine can be used to roll
bottle caps. When using bottles of any specification, just put the bottle of that specification on the pallet Hold the cross arm with one hand, loosen the nut on the left side of the cross arm with the other hand, and lower or raise the cross arm until the capping head is about
mm from the bottle cap. Tighten the nut, and then use the random belt Use the Allen wrench to place the support ring against the cross arm and then lock the support ring. (Note: When tightening, pay attention to the alignment of the capping head and the bottle cap.)
2. Adjustment of the
type support block
Place the bottle into the
lower support block, and move the support block Loosen the two screws on the
mold block and move the bottle and lower mold block together until the capping head and bottle cap are aligned, then tighten the two screws on the
mold block.
3. Specific operation method
Put the bottle filled with liquid and capped on the lower tray, lean on the
support block, hold the bottle with one hand, and lift the handle with the other hand Pull it backwards and downwards. At this time, the tray holds the bottle and lifts up until the bottle cap and the capping head are pressed tightly.
After the bottle cap and the capping head are pressed tightly, the three capping cutter heads that keep rotating rotate several times to tighten the bottle cap. (Note) The motor must run clockwise.
Push the handle forward so that the rolled cap returns to its original position along with the tray. The entire operation process is completed. Repeat the above operation every time you roll a bottle cap.
4. Adjustment of the capping head
The machine is equipped with multiple capping heads, and the capping head can be selected according to the size of different bottle caps. You can try it with a bottle before formal use.
If the cap is not rolled tightly, you can unscrew the locking nut of the capping head and unscrew the upper capping head counterclockwise, and then lock the upper fixing nut.
The cap is rolled too tightly and there is a phenomenon of rotary cutting of the bottle cap. You can unscrew the locking nut of the upper capping head and screw in the upper capping head clockwise, and then lock the upper fixing nut.
If the lower edge of the bottle cap is not tightened tightly, the eccentricity of the three rolling cutter heads can be appropriately adjusted according to the actual situation. If the tightening is too tight and the bottle may be crushed, the eccentricity of the three rolling heads can be appropriately increased.
Due to limited space, we are forced to omit some information. If you need detailed information, please log on to the Yihong Pharmaceutical Machinery website
. To visit the equipment, please contact our company's sales phone number
or
. Welcome to the factory for inspection and guidance.